Home About us Cathodic Protection Products Inquiry Download Contact us

 Pipe Line Anode

Zinc bracelet anodes can be used in very low temperatures, in deep waters, or in brackish waters.
Bracelet anodes are designed with a utilization factor higher than 0.80, and are based on ISO, NACE, and DNV standards for anodes’ manufacturing and design.
The electrical connection between the anodes and the pipeline is achieved by the use of a bonding wire, which can be attached by thermite welding or by pin brazing.
Epoxy coating is applied to the interior of the anodes with a minimum thickness of 100 microns, and in accordance with client requirements.
Neoprene sheets used to enhance friction between the pipe coating and the anodes are fixed at steel loop locations by appropriate adhesion methods on the underneath side of the pipeline.
For pipelines with elevated temperatures, thermo insulation inside the anodes is suggested to reduce the temperature and increase the electrochemical performance of the bracelet anodes.
At SYNCOR, we have the capability to manufacture anodes of different shapes and sizes to allow for easy installation, and to reduce damages when the anodes pass over a stinger as the pipeline leaves the lay barge.
BTB - Tapered, Bolted half shell bracelet anode
BSH - Bracelet anode, square hinged and bolted half shell bracelet anode
BHB - Bracelet anode, hinged and bolted segment bracelet anode
BSW - Bracelet anode, Square ends welded
BTH - Bracelet anode, tapered hinged and bolted half shell bracelet anode
BTW - Bracelet anode tapered- welded
Copyright © 苏州波高阴极保护技术有限公司 All rights Reserved 苏ICP备15020836号-1